Black plate (482,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
9-34
In case of emergency/If your vehicle is involved in an accident
1)
Priming pump
2. Operate the priming pump located in
the front passenger
’
s side of the engine
compartment by depressing the pumping
knob until you feel strong resistance to
bleed the trapped air from the fuel system.
3. Try to start the engine within 15
seconds of starter motor operation.
If the engine does not start, perform step 2
once again and restart the engine within
15 seconds of starter motor operation.
If the engine still does not start the second
time, we recommend that you contact your
nearest SUBARU dealer for assistance.
4. After starting the engine, depress the
accelerator pedal lightly until the engine
runs smoothly. Also, confirm that all
warning and indicator lights have turned
off. The fuel injection system automatically
lowers the idle speed as the engine
warms up.
If your vehicle is involved in
an accident
CAUTION
If your vehicle is involved in an
accident, be sure to inspect the
ground under the vehicle before
restarting the engine. If you find that
fuel has leaked on the ground, do
not try to restart the engine. The fuel
system has been damaged and is in
need of repair. Immediately contact
the nearest automotive service facil-
ity. We recommend that you consult
your SUBARU dealer.
Your vehicle has a fuel pump shut off
system. When the vehicle sustains an
impact in an accident, etc., the fuel pump
shut off system stops supplying the fuel in
order to minimize fuel leakage.
Perform the following procedures to re-
start the engine after the system is
activated.
Models without
“
keyless access with
push-button start system
”
:
1. Turn the ignition switch to the
“
LOCK
”
or
“
ACC
”
position.
2. Restart the engine.
