Black plate (478,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
9-30
In case of emergency/Access key
–
if access key does not operate properly
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the status of the push-button ignition
switch changes to either of the following.
.
When the keyless access with push-
button start system is deactivated:
“
ACC
”
.
Under other conditions:
“
ON
”
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
clutch pedal (MT models) or brake pedal
(CVT models) released. The status of the
push-button ignition switch then changes
to
“
ON
”
.
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.
&
Starting engine
1. Apply the parking brake.
2. Shift the shift lever into neutral (MT
models) or the select lever into the
“
P
”
position (CVT models).
3. Depress the brake pedal.
4. Depress the clutch pedal (MT models).
Left-hand drive models
Right-hand drive models
5. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the push-button ignition switch turns
to the
“
ACC
”
or
“
ON
”
position.
6. While depressing the brake pedal (all
models) and the clutch pedal (MT mod-
els), press the push-button ignition switch.
NOTE
If the engine does not start even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.
