Still FM-X EW Series, Original Instructions Manual, Page: 108 / 360

4
Operation
Driving
DANGER
Risk of tipping due to change in vibration characte-
ristics of the load!
If the controller is switched off or fails, the speed of
the hydraulic functions will no longer be reduced.
– Always adapt the use of the hydraulic functions
to suit the situation.
– Do not take risks with safety.
The optimisation of the hydraulic functions
affects the following functions:
• Shifting the reach carriage
• Tilting the lift mast
• Transition shift of the lift mast
This variant can also be equipped with the
following additional functions:
• Lift height indicator
• Lift height preselector
• Transition shift centre position
• Tilting centre position
Driving
Safety regulations when driving
Driving conduct
The driver must comply with the highway code
when driving within the plant.
The speed must be appropriate to the local
conditions.
For example, the driver must drive slowly
around corners, in and around tight passage-
ways, when driving through swing doors, at
blind spots or on uneven roadways.
The driver must always maintain a safe
braking distance from trucks and persons
in front, and must always have the truck under
control. He must avoid stopping suddenly,
turning at speed and overtaking in dangerous
places or in blind spots.
Before driving with or without a load, the forks
must be lowered as far as possible.
96 50988078001 EN - 10/2018