Still FM-X EW Series, Original Instructions Manual, Page: 257 / 360

Operation
4
Replacing and transporting the battery
WARNING
Risk of crushing from moving parts!
Observe the information signs on the truck; see the
chapter entitled "Labelling points".
The battery sits in a battery frame. To replace
the battery, this frame is extended in the fork
direction together with the reach carriage.
When retracted, this battery frame is locked
mechanically.
The battery can be removed using the follo-
wing lifting devices:
• Forklift truck or crane (for standard equip-
ment)
• Change frame (for variant with roller chan-
nel for side battery replacement)
The load capacity of the lifting accessory used
must at least match the battery weight (see the
battery nameplate).
NOTE
If the reach system of the truck is not working
due to a battery problem, the battery must be
removed by your authorised service centre.
Incompatibility of battery connectors
from different manufacturers
CAUTION
Risk of fire from using battery connectors from
different manufacturers!
The battery connectors on the truck and on the
battery must be from the same manufacturer. Poor
contact pairing between battery connectors from
different manufacturers can result in overheating.
– Check the manufacturer of the battery connector
before replacing the battery.
– Connect battery connectors from this manufac-
turer only.
50988078001 EN - 10/2018 245