Still FM-X EW Series, Original Instructions Manual, Page: 267 / 360

Operation
4
Replacing and transporting the battery
in accordance with the instructions of the
manufacturers of the battery, battery charger
and truck.
– The handling instructions for the battery and
the operating instructions for the battery
charger must be followed.
Positioning the truck correctly in relation
to the battery rack
CAUTION
Before replacing the battery, ensure that the rollers
for the battery transport in the battery rack are
aligned with the rollers in the truck. Failure to do
so could cause damage to the battery rack rollers
and locking mechanism.
The truck must be placed in such a position
relative to the battery rack that the transition of
the battery between the truck and the battery
rack can be performed without mechanical
resistance.
– Make sure that the transfer height of the
battery rack is correctly adjusted to that of
the truck, refer to the chapter entitled "Bat-
tery change frame/Adjusting the transfer
height".
– Position the truck and battery rack parallel
to each other.
– Position the truck and the battery rack so
that the roller channels of the truck and
battery rack are exactly aligned with each
other.
Extending the battery
The battery sits in a frame. To replace the
battery, this frame is extended in the load
direction together with the reach carriage.
Before the reach carriage is extended, the
battery lock lever must be actuated. When the
reach carriage is fully retracted, the battery
frame is mechanically locked again.
– Retract the reach carriage fully.
– Apply the parking brake.
50988078001 EN - 10/2018 255