Still FM-X EW Series Original Instructions Manual Download Page 154

Page: 154 / 360

Operation

Handling loads

Danger area

The danger area is the area in which people

are at risk due to the movements of the truck,

its working equipment, its load-carrying

equipment (e.g. attachments) or the load.

Also included are the areas where loads

could fall or working equipment could fall or

be lowered.

DANGER

Risk of injury!
– Do not step on the fork.

DANGER

Risk of injury!
– Do not step under the raised forks.

DANGER

People may be injured in the danger area of the

truck!
The danger area of the truck must be completely

clear of all personnel, except the driver in his

normal operating position. If persons fail to leave

the danger area despite warnings:
– Cease work with the truck immediately.
– Secure the truck against use by unauthorised

parties.

DANGER

Danger of death from falling loads!
– Never walk or stand underneath

suspended loads.

142

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Still FM-X EW Series, Original Instructions Manual, Page: 154 / 360

Search results

Summary of Contents for FM-X EW Series

Reviews: