Still FM-X EW Series, Original Instructions Manual

Page: 103 / 360

Operation
4
Testing and activities before daily use
1
2
Checking the "automatic tilting
centre position" (variant) for correct
function
NOTE
Perform the "Automatic tilt to centre position"
function check each time before using the
truck.
The driver can use the "automatic tilt to centre
position" function to change the tilt of the fork
arms to 0° automatically. Depending on the
truck version, either only the fork carriage
(fork tilter) or the entire lift mast (mast tilter) is
positioned. To do this, the pushbutton must
be actuated until the function switches off
automatically.
– Tilt the fork carriage or the entire lift mast
towards the drive side.
The fork carriage or the entire lift mast must tilt
fully to the drive side and move gently as far as
the end stop.
– Push the transition shift/tilt centre position
push button (1) on the right-hand side.
In the display-operating unit, the arrows (2) on
the "transition shift" symbol must flash until the
centre position is reached.
Once the function has switched off automati-
cally, the tilt of the fork arms must be in the 0°
position.
– Tilt the fork carriage or the entire lift mast
towards the load side.
The fork carriage or the entire lift mast must tilt
fully to the load side and move gently as far as
the end stop.
50988078001 EN - 10/2018 91