Still FM-X EW Series Original Instructions Manual Download Page 36

Page: 36 / 360

Safety

Deﬁnition of responsible persons

DANGER

The use of drugs, alcohol or medications that affect

reactions impair the ability to drive the truck!
Individuals under the inﬂuence of the aforementio-

ned substances are not permitted to perform work

of any kind on or with the truck.

Prohibition of use by unauthorised

persons

The driver is responsible for the truck during

working hours. He must not allow unautho-

rised persons to operate the truck.
When leaving the truck, the driver must secure

it against unauthorised use, e.g. by pulling out

the key.

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Still FM-X EW Series, Original Instructions Manual, Page: 36 / 360

Search results

Summary of Contents for FM-X EW Series

Reviews: