Still FM-X EW Series, Original Instructions Manual

Page: 258 / 360

4
Operation
Replacing and transporting the battery
Actuating the battery lock
Before the release lever for the battery lock
can be pulled, the battery lock must be re-
leased. The battery lock is released via the
"Retract reach carriage" operating function on
the joystick 4Plus or the corresponding finger-
tip switch.
The battery lock is only released if the truck is
stationary.
4
2
3
1
Releasing the battery lock
– Bring the truck to a standstill.
– Press and hold the foot switch
– Use the actuating lever (joystick or fingertip
switch) to retract the reach carriage to the
drive side until the reach carriage stops.
– Continue to actuate the actuating lever. Af-
ter 5 seconds the "lock"(1) symbol appears
in the display.
– Release the actuating lever. After approx.
2 seconds, the (2) arrow shows that the
reach carriage can be retracted further
into the end position. If the end position
is not reached within 2 minutes, or if the
accelerator pedal is pressed, the operation
is cancelled. The "lock" symbol is hidden
again.
– Retract the reach carriage to the end
position to unlock the battery.
– Pull the release lever (3) for the battery lock
upwards. The battery is unlocked.
When the battery is unlocked:
• An acoustic warning signal is heard
• The "creep speed"(4) symbol is displayed
• The driving speed is limited to 1.6 km/h
• The hydraulic functions are restricted
– Eject the battery together with the reach
carriage to the load side.
Locking the battery
– Press and hold the foot switch
246 50988078001 EN - 10/2018