Still FM-X EW Series, Original Instructions Manual

Page: 110 / 360

4
Operation
Driving
If this is not possible, a second person acting
as a guide must walk in front of the truck.
In this case, the driver must only move at
walking pace and with extra care. The truck
must be stopped immediately if eye contact
with the guide is lost.
Additional rear-view mirrors may only be used
for observing the road area on the load side
of the truck and not for travelling in the load
direction. If visual aids (mirror, monitor) are
required to achieve sufficient visibility, it is
necessary to practise using them. Extra care
should be taken when travelling in the load
direction if you are using visual aids.
When using attachments, special conditions
apply; see the chapter entitled "Fitting attach-
ments".
Any glass and mirrors must always be clean
and free of ice.
1
Panoramic mirror
The panoramic mirror (1) may only be used for
observing the road area on the load side of the
truck and not for travelling in the load direction.
Extra care should be taken when travelling in
the load direction if you are using visual aids.
The panoramic mirror must always be clean
and free of ice.
Any damage to the panoramic mirror that
could restrict the driver's visibility must be
rectified immediately.
The position of the panoramic mirror may only
be changed in such a way that the area behind
the lift mast remains visible.
Roadways
Dimensions of roadways and aisle widths
Within the EU, Directive 89/654/EEC (mini-
mum safety and health requirements for the
workplace) must be observed. The respective
national guidelines apply for areas outside
of the EU. In each case, it must be checked
whether a larger aisle width is necessary, e.g.
in the case of different load dimensions.
98 50988078001 EN - 10/2018