4
Operation
Replacing and transporting the battery
– Release the battery lock (refer to the
chapter entitled "Actuating the battery
lock").
– Press the foot switch.
2
– Extend the reach carriage fully together with
the battery (2).
– Switch off the truck.
– Press the emergency off switch.
CAUTION
Risk of component damage!
If the battery male connector is removed while the
truck is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens their service life.
– Switch off the truck before the battery male
connector is disconnected.
– Do not disconnect the battery male connector
while the truck is switched on except in the case
of an emergency.
3
4
– Disconnect the battery male connector (3).
CAUTION
There is a risk of short circuit if the
cables are damaged!
Position the battery cable on the
battery in such a way that it cannot be
crushed when removing or inserting
the battery.
– Check the connection cables for
damage.
Releasing the swing bolt
CAUTION
If the battery rolls out of the battery compartment
when no external device is present, this can lead to
material damage.
Before removing the battery, always have an
external device in position.
256
50988078001 EN - 10/2018
Summary of Contents for FM-X EW Series
