Still FM-X EW Series, Original Instructions Manual, Page: 273 / 360

Operation
4
Replacing and transporting the battery
confirm by pushing the "OK" button on the
keypad (2).
– The capacity is read from the nameplate
on the battery and is input as a column
of numbers. The numbers are selected
using the arrow buttons on the keypad (2).
Confirm that each number in the column is
set correctly by pushing the "OK" button
on the keypad (2). Exit the settings by
pushing the "ESC" button on the keypad
(2) for approx. 2 seconds.
1
2
Transporting the battery using a
lifting device (lead acid batteries)
DANGER
Risk of fatal injury from falling load
– Never walk or stand underneath
suspended loads.
– Determine the weight of the battery
(battery identification plate). Note
the load capacity of the lifting
device.
– Always lift the battery with suitable
lifting gear (bridge piece).
– Do not use the methods described
here to transport the battery over
long distances.
When removing and inserting the
battery using a lifting device, always
ensure that no one is standing directly
next to the battery or between the
battery and the lifting device.
WARNING
Risk of crushing/shearing!
The battery must be transported very carefully, i.e.
at low speed, using slow steering movement and
careful braking.
– Before transporting the battery, determine
the weight of the battery (battery identifi-
cation plate). Note the load capacity of the
lifting device.
– To prevent the raised battery from damag-
ing the truck, park the truck at a sufficient
distance from any obstacles.
50988078001 EN - 10/2018 261