Still FM-X EW Series, Original Instructions Manual, Page: 142 / 360

4
Operation
Lifting
1
2
Automatic tilting centre position
The driver can use the "automatic tilt to centre
position" function to change the tilt of the
fork arms to 0° automatically. To do this, the
pushbutton must be actuated until the function
switches off automatically. Depending on
the truck version, either only the fork carriage
(fork tilter) or the entire lift mast (mast tilter) is
positioned.
– Push the "transition shift/tilt centre position"
pushbutton (1) on the left-hand side until the
function switches off automatically.
The arrows (2) on the display and operating
unit flash until the end position is reached.
The truck tilts the fork arms to the 0° position.
1 2
1 "Automatic tilt to centre position" symbol
2 "Automatic transition shift centre position"
symbol
Additional button for automatic centre
position (variant)
The automatic centre position transition
shift/tilting can be set on two individual buttons
as an option. The buttons are labelled with the
symbols for the automatic centre position.
– To operate the automatic centre position,
observe the symbols (1, 2) of the adjacent
buttons.
130 50988078001 EN - 10/2018