Still FM-X EW Series, Original Instructions Manual, Page: 197 / 360

Operation
4
Lift height preselector/easy Target (variant)
1 Level 1-20
2 Area A-H
5 6 9 7 8
Definition of terms
Level
One target height can be assigned to each
level. Valid levels can be reached semi-
automatically.
Area
A warehouse can be divided into eight areas
and each area can contain up to 20 levels.
Placing into stock
Placing into stock (3) is the insertion of a pallet
into the rack.
Removing from stock
Removing from stock (4) is the removal of a
pallet from the rack.
Assistant
The display includes an assistant (5) that
shows the possible movements via symbols
and corresponding direction arrows. During
automatic operation, the display shows only
the direction arrows for function symbols that
are currently allowed.
The individual symbols mean:
• Main lift lowering/lifting (6)
• Shift to drive side/load side (7)
• Tilt to drive side/load side (8)
• Transition shift left/right (9)
Pallet free lift
The pallet free lift (10) is the difference in
height by which the load support is raised
or lowered after shifting in order to place a load
into stock or remove a load from stock. This
value can be individually adjusted for placing
into and removing from stock at each level by
using the service software. The default setting
is 150 mm.
Reference drive
The process of passing the reference switch
located on the upper part of the lift mast is
known as referencing. This process sets the
reference value for the height position.
50988078001 EN - 10/2018 185