Still FM-X EW Series Original Instructions Manual Download

Page: 214 / 360

Operation

Cab (variant)

Opening the cabin door from the inside

– Grip the handle, push the locking knob (3)

and push the cab door outwards.

Closing the cab door

DANGER

Risk of fatal injury as a result of driving with the cab

door open!
The driver can be injured if he does not keep his

entire body within the protective cab, or if he falls off

the truck.
– Always close the cab door before driving off, and

keep it closed when driving.

DANGER

There is a risk of damage caused by collision if the

cab door opens while driving.
– The cab door must be latched securely in the

engaged position.

– Close the door ﬁrmly.
The door must engage in the lock and the

rubber seals must line up correctly.

202

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Related manuals for FM-X EW Series

Brands by name

Popular brands

Still FM-X EW Series, Original Instructions Manual

Search results

Summary of Contents for FM-X EW Series

Reviews:

Related manuals for FM-X EW Series

Brands by name

Popular brands