Still FM-X EW Series, Original Instructions Manual, Page: 88 / 360

4
Operation
Testing and activities before daily use
Component
Course of action
Wheels, tyres
Perform a visual inspection for wear and damage.
Make sure that only approved tyre types are used
(see the chapter entitled " Technical data/Wheels
and tyres").
In the event of uneven tyre wear on the load wheels,
change both tyres.
Observe the safety regulations in the chapter entitled
"Tyres".
Overhead guard, guard grille (variant)
Perform a visual inspection for integrity.
Check for secure mounting.
Weather protection cab, cold store cab
Perform a visual inspection for integrity.
Check for secure mounting.
Steps Make sure they are clean (free of ice, not slippery).
Panes of glass
Perform a visual inspection for integrity.
Make sure they are clean (also free of ice).
Handholds
Check for secure mounting.
Battery lock
Check the battery lock on the internal roller channel
(variant) for condition and function. Close the battery
lock.
Battery frame
Perform a visual inspection for integrity (e.g. cracks
or breaks).
Check that the battery frame is fully retracted to-
wards the drive side and is securely locked in this
position.
Battery connection assembly
Perform a visual inspection for integrity and defor-
mation.
Check the contacts.
Inspect the battery male connector and the plug
connection for foreign objects that may have become
lodged and for moisture. Remove such deposits, for
example with compressed air.
Have damaged battery male connectors replaced by
the authorised service centre.
Covers
Visual inspection: all covers must be fitted and
closed.
Labelling, adhesive label
Check that labels are present and intact/legible.
Replace damaged or missing adhesive labels in
accordance with the chapter entitled "Labelling
points".
Lighting, warning units (e.g. signal horn) Check the integrity and function.
76 50988078001 EN - 10/2018