Still FM-X EW Series, Original Instructions Manual, Page: 203 / 360

Operation
4
Lift height preselector/easy Target (variant)
– Activate the lift function (displayed by
the assistant). The selected height plus
the pallet free lift height is reached and
the automatic stop is performed (6). The
display (5) shows a distance to the target ≤
6 mm.
– Drive up to the racking (7).
– Activate the LS shifting function (shown by
the assistant) and push the pallet onto the
shelf (8).
– Activate the lowering function (shown by
the assistant). The forks are lowered by the
pallet free lift (9) height.
– Activate the DS shifting function and retract
the reach carriage completely (shown by
the assistant) (10).
The automatic routine is complete. All func-
tions are available again (= manual operation).
– Back the truck away (11).
1
3 4 5 2
Example: Removing from stock in fully
automatic mode
NOTE
Removing from stock can only be selected
if valid heights were assigned to the levels
during the teach-in process. Levels that are
invalid or that have not had a height assigned
to them are not activated in automatic mode.
All programmable heights are set at the
factory to "5500 mm". Automatic mode can
be interrupted at any time using the "MAN"
button!
– After entering the target level (e.g. A2),
press the button for removing from stock
(1). The symbol for removing from stock
(3) and "auto" for automatic operation (4)
appear in the assistant (2). The display
50988078001 EN - 10/2018 191