Still FM-X EW Series, Original Instructions Manual

Page: 156 / 360

4
Operation
Handling loads
Instructions for transporting suspended loads:
• Swinging of the load is to be prevented by
using the proper driving speed and driving
manner (careful steering, braking).
• Hanging loads must be coupled to the truck
in such a way that the harness cannot shift
or release unintentionally, and cannot be
damaged.
• When transporting suspended loads, suit-
able devices (e.g. guy wires or supporting
poles) must be available so that accompa-
nying persons can guide suspended loads
and prevent the loads from swinging
• Take particular care to ensure that there is
no one in the drive direction in the driving
lane.
• If, despite this, the load begins to swing,
ensure that no person is placed at risk
DANGER
Risk of accident!
When transporting suspended loads, never per-
form or end driving and load movements abruptly.
Never drive on ascending or descending gradients
with a suspended load!
It is not permissible to transport containers holding
fluids as hanging loads.
Picking up a load
NOTE
Loads may only be picked up and set down on
flat surfaces.
DANGER
There is a risk to life caused by a falling load or if
parts of the truck are being lowered.
– Never walk or stand underneath suspended
loads or raised fork arms.
– Never exceed the maximum load indicated on
the capacity rating plate. Otherwise stability
cannot be guaranteed.
Only store pallets that do not exceed the per-
missible measurements. Damaged loading
equipment and incorrectly formed loads must
not be stored. Store the load so that the spec-
144 50988078001 EN - 10/2018