Still FM-X EW Series, Original Instructions Manual, Page: 308 / 360

5
Maintenance
General maintenance information
At operating hours
1000 2000 4000 5000 7000
Carried out
8000 10000 11000 13000 14000


Check the guide pulleys for damage and wear
Check the mast rollers and chain rollers for damage and wear
Check the tilt cylinders and connections for damage and check for leak tightness.
Check the joints of the tilt attachment for play and ease of movement
Check the reach cylinders and connections for damage and check for leak tightness.
Check the joints of the reach cylinder for play and ease of movement, and lubricate
Check the fork carriage for damage and wear
Check the fork height setting and adjust the chain length if necessary
Check the fork arm interlock for damage and correct function
Check the fork arms for wear and deformation
Check that there is a safety screw on the fork carriage or on the attachment
Check the hydraulic hoses, re-adjust, replace if necessary
Lubricate the fork tilter/sideshift
Special equipment
Replace the filter mat for the heating system.
Check the heating system for damage; observe the manufacturer's maintenance
instructions
Check the optical height measuring system (visual inspection), clean the sensor and
reflector
Check the attachments for wear and damage; observe the manufacturer's mainten-
ance instructions
Clean excessive dirt from the battery change frame and check the frame for defor-
mation/damage. Check the freedom of movement of the rollers and keep the surface
of the rollers free of corrosion by applying a film of oil.
Lubricating
Lubricate using approved lubricants in accordance with the lubrication plan
General
Check labelling to ensure it is complete
Perform a test drive
Read out and check the error numbers and delete list
Reset the maintenance interval
296 50988078001 EN - 10/2018