98
14 January 2021, SmartScanIS User’s Guide for Union Pacific, EUD-2016026-00 Rev.2
23
Align the screw holes in the flex-conduit-adapter plate with the screw holes in the
mount.
24
Replace the two center screws and tighten by hand.
This should hold the flex-conduit-adapter plate in place.
25
Leave 6 inches (15.2 centimeters) of the bearing scanner cable in the mount.
26
In the screw hole closest to the cable, replace the screw and tighten by hand.
27
In the screw hole farthest from the cable, replace the ground lug, internal-tooth washer,
and screw.
28
Tighten by hand.
29
Using a T-handle 3/16-inch hex-wrench, tighten the four screws until they are
completely tight.
30
Attach the bearing scanner cable connector to the scanner box connector.
31
If this is a
Type II
bearing scanner:
a
With the hole on top of the bearing scanner cover facing north or east, set the
cover-and-module assembly onto its mount.
b
Using the T-handle 1/4-inch hex-wrench, uniformly tighten the two socket-head-cap
screws.
Direction of Scan (North or East)
Summary of Contents for SmartScanIS
