STC SmartScanIS, User Manual

Page: 162 / 391

162
14 January 2021, SmartScanIS User’s Guide for Union Pacific, EUD-2016026-00 Rev.2
11 If COM3 has nothing plugged in it, plug your computer into it.
12 If COM3 has something plugged into it, unplug what is connected to COM3 and plug
your computer into it.
13 Be sure that the laptop computer is turned on, that it has appropriate communications
software installed, that the communications software is set to use full duplex, that the
baud rate is set to 9600, and that a LOG file is opened.
The baud rate of your computer must match the baud rate of the selected serial port
because they are in direct, one-to-one, communication with one another. For example,
the baud rate for COM3 was set to 9600 at the factory. If the customer changed this
baud rate, your computer must be set to the changed value.
14 Using the serial interface, display the Main menu.
Chapter 11 - Serial Interface tells how to display the Main menu. The Main menu
looks like this.
STC Integrated Detector System, Milepost-0501.2, Track:Single
05/31/2013
9:35
Main Menu
------------------------------------------------
•
•
•
H) Event Log
I) Setup Menu
J) T94 Train Detail
X) Exit Menu
15 Select the Setup menu .
This prompt appears.
Enter Password:
Status LEDs
COM3
COM2
Status LEDs
COM3
COM2