EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
129
16
If this is a
Type II
wheel scanner:
a
With the hole on top of the wheel scanner cover facing the center of the track, set
the cover-and-module assembly onto its mount.
b
Using the T-handle 1/4-inch hex-wrench, uniformly tighten the two socket-head-cap
screws.
17
If this is a
Type III
wheel scanner:
a
With the hole on top of the wheel scanner cover facing the center of the track, set
the mounting plate back onto its scanner mount.
b
Using the T-handle 1/4-inch hex-wrench, uniformly tighten the two socket-head-cap
screws.
c
Reconnect the heater wiring plug.
d
With the hole on top of the wheel scanner cover facing the center of the track, set
the weather cover back onto its mounting plate.
e
Using the T-handle 1/4-inch hex-wrench, uniformly tighten the four socket-head-cap
screws.
18
Repeat steps
3
through
17
for the wheel scanner on the opposite rail.
19
Remove the alignment fixture from the track.
20
If this is a single-track site:
a
Store the alignment fixture in the bungalow.
b
Go to the next chapter.
21
If this is a double-track site:
a
Repeat steps
1
through
19
for the second track.
b
Store the alignment fixture in the bungalow.
c
Go to the next chapter.
Summary of Contents for SmartScanIS
