STC SmartScanIS, User Manual

Page: 89 / 391

EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
89
5.9 Identifying the Installation Tools
Besides the tools needed to install signal cases, underground cables, and power services, you
need these to install your SmartScanIS.

Laptop computer

Track drill with 3/8-inch bit

1/2-inch drive ratchet with 9/16-inch deep well socket

3/4-inch drive ratchet with 1-7/16-inch socket

9/16-inch torque wrench

1/2-inch nutdriver

9/64-inch Allen wrench (if your site uses Type II scanners)

Medium size adjustable box wrench (aka crescent wrench)

Carpenters level

#2 Phillips head screwdriver

Small slotted screwdriver (aka flathead screwdriver)

50-foot (15-meter) or longer tape measure

Multimeter, reading at least 110-120 VAC, 0-50 VDC, and 0-1 megohm
In the box containing the bearing scanners are these tools.

Short-handle 1-1/2-inch open-end wrench, which is used to install the scanner mounts

T-handle 3/16-inch hex-wrench, which is used to install the flex-conduit-adapter plates
on the scanner mounts

T-handle 1/4-inch hex-wrench, which is used to install the scanners on the scanner
mounts

Two combination 9/16-inch open-end box wrenches, which are used to install the
transducers and align the scanners
When you finish using the supplied tools, store them in the bungalow, if possible. They are
also used to maintain the system.