STC SmartScanIS, User Manual

Page: 236 / 391

236
14 January 2021, SmartScanIS User’s Guide for Union Pacific, EUD-2016026-00 Rev.2
2 Select the System Functions menu.
The System Functions menu appears.
STC Integrated Detector System, Milepost-0501.2, Track:Single
05/31/2013
9:35
System Functions
-------------------------------------------------
A) Radio Test
B) Vocabulary Test
C) Gate Test
D) 1KHz Test Tone
E) Auto-Calibration
F) Reset the COP Counters
G) Remote System RESET
H) Clear All Stored Train Data
I) Clear Event Log
J) Send JC Message
K) Send JM Message
L) Send JP Message
M) Send JS Message
N) Real-Time Diagnostics
X) Exit Menu
3 To leave the System Functions menu and return to the Setup menu:
a Press [Esc] .
The Setup menu reappears.
b Skip the remaining steps.
4 To execute the radio test:
Selection of the Radio Test option broadcasts a short message through the speaker
and through the radio. At single-track sites, the text of the message is "Testing, U-P
detector, milepost (milepost number), testing, one, two, three, four, five, four, three,
two, one, testing detector-out." At multitrack sites, the text of the message is "Testing,
UP detector, milepost (milepost number), track (track designation), testing, one, two,
three, four, five, four, three, two, one, testing, detector-out."
a Be sure that the speaker (inside the SmartScanIS enclosure) is plugged in and that
its volume knob is turned to the middle position.
STC Integrated Detector System, Milepost-0501.2, Track:Single
05/31/2013
9:35
System Functions
-------------------------------------------------
A) Radio Test
B) Vocabulary Test
C) Gate Test
•
•
•