STC SmartScanIS, User Manual

Page: 216 / 391

216
14 January 2021, SmartScanIS User’s Guide for Union Pacific, EUD-2016026-00 Rev.2
5 To set or change the hotwheel setting:
The Equipment submenu shows whether Hotwheel alarm detection is enabled (YES)
or disabled (NO). When enabled, hotwheel alarms will be announced and stored.
Milepost-0501.2, Track:Single
Equipment
---------------------------------------------------
A) Dragger...................... NO
B) Hot Wheel.................... NO
C) High Load.................... NO
•
•
•
a From the Equipment submenu, select Hot Wheel .
The hotwheel setting toggles between enabled (YES) and disabled (NO). The
Hotwheel option on the Equipment submenu changes. The Equipment submenu
reappears.
If you want Hotwheel alarm detection to occur, be sure that YES appears after the
words Hot Wheel on the Equipment submenu.
b Return to step 3 .
6 To set or change the high-load setting:
The Equipment submenu shows whether High-Load alarm detection is enabled (YES)
or disabled (NO). When enabled, high-load alarms will be announced and stored. To
announce High-Load alarms, YES must appear after the words High Load on the
Equipment submenu and NO must appear after the word HiWide on the Messages
submenu. To announce High-Wide alarms, YES must appear after the words High
Load on the Equipment submenu and YES must appear after the word HiWide on the
Messages submenu.
Milepost-0501.2, Track:Single
Equipment
---------------------------------------------------
A) Dragger...................... NO
B) Hot Wheel.................... NO
C) High Load.................... NO
D) Wide Load.................... NO
•
•
•