STC SmartScanIS, User Manual

Page: 153 / 391

EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
153
2 If the bungalow isn't attached to a properly installed outside grounding system, fix this
problem before proceeding.
Chapter 8 - Installing the Bungalow Components tells how to ground the
SmartScanIS.
3 If there isn't a ground bus inside the bungalow that has been attached to a properly
installed outside grounding system, fix this problem before proceeding.
4 Check that all bungalow components have been installed properly.
5 If any component of the bungalow isn't installed or isn't installed properly, install it
properly before proceeding.
Chapter 8 - Installing the Bungalow Components tells how to install the bungalow
components.
6 Inside the bungalow, check that there are no loose wires or cables.
7 If there are any loose wires or cables, fix this problem before proceeding.
9.3 Powering-up the SmartScanIS
To power-up the SmartScanIS:
1 Be sure that you have on hand a multimeter and a 1/2-inch insulated socket wrench.
2 Open the door on the SmartScanIS enclosure.
3 On the Surge Protection Subassembly, toggle off both breakers.
4 If the SmartScanIS enclosure hasn't been properly grounded, fix this problem before
proceeding.
5 Switch on the AC power to the bungalow.
DC Breaker
AC Breaker
Ground
DC Breaker
AC Breaker
Ground