STC SmartScanIS, User Manual

Page: 283 / 391

EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
283
The table below lists the fields from the header section and the contents of each field.
Heading Contents of Field
Train# The number that identifies the train in the Exceptions directory.
Date The date the train arrived at the site. Date is in mm/dd/yy format.
Time The time the train arrived at the site. Time is in 24-hour hh:mm format,
where 8 a.m. is 08:00, noon is 12:00, 8 p.m. is 20:00, and midnight is 00:00.
SiteID The name of the site. This can be supplied either by the Harriman Dispatch
Center via the Polling System or by the
Site ID option on the Polling System
submenu. The default is NONAME .
Speed The train's exit speed in miles per hour.
Axles The total number of axles counted by the SmartScanIS.
Direction The direction the train was traveling. Valid values are North, South, East,
and West.
Milepost The five-digit milepost of the site. Chapter 11 - Serial Interface tells how to
set this value using the Milepost submenu.
Track The track designator of the site. For single-track sites, the value is Single.
For multitrack sites, valid values are 1, 2, 3, 4, 5, and 6.
Chapter 11 - Serial
Interface tells how to set this value using the Track Number submenu.
Temperature The ambient temperature, in degrees Fahrenheit, at the time the train
passed the site.
Battery The backup battery voltage at the time the train passed the site.
Rail Rail orientation for each side of the train. If the track orientation is east and
west, rails are north and south. If the track orientation is north and south,
rails are east and west.
Max The maximum temperature (above ambient), in degrees Fahrenheit,
recorded by the bearing scanner on a given railside.
Avg The average temperature (above ambient), in degrees Fahrenheit,
calculated from all recorded temperatures from the bearing scanner on a
given railside.