EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
147
The figures below show the location of the terminal blocks for incoming DC.
13
Using a 1/2-inch nutdriver, connect the red wire from the positive terminal block to the
left side of the battery block.
14
Using a 1/2-inch nutdriver, connect the black wire from the negative terminal block to
the right side of the battery block.
15
If this is a single-track site, go to
8.14 Wind Monitor
.
16
If this is a double-track site:
a
Repeat steps
1
through
14
for the batteries that power the other SmartScanIS
enclosure.
b
Go to
8.14 Wind Monitor
.
Terminal Blocks
for Incoming DC
DC Breaker
Terminal Blocks
for Incoming DC
DC Breaker
Summary of Contents for SmartScanIS
