Spectris Particle Measuring Systems IsoAir 310P, Operation Manual

Page: 79 / 105

Page C-10 IsoAir 310P Aerosol Particle Sensor Operations Manual
Appendix C Wi-Fi Configuration Hardware Details
Status LEDs
There are three status LEDs on the bottom side of the Wi-Fi bridge as mounted in the
enclosure (see
Figure C-6 on page C-9). Their location on the board is illustrated in
Figure C-7 on page C-10. These LEDs are not directly visible, but their reflections may
be viewed by looking at the proper angle. Table C-1 on page C-10 explains the different
status LEDs.
Figure C-7 Wi-Fi Bridge Rendering Showing Status LEDs
Table C-1 LED Status Descriptions
LED Color Status
Power Off No power.
Red Fail power-on self-test (POST)
Amber No valid IP address.
Green OK
Link Off No power.
Blinking Red Searching for Access Point.
Green OK (Associated with Access Point)
Comm Off • No power.
OR
• No Wi-Fi and no Ethernet connection.
Red No Wi-Fi TCP. Physical Ethernet is attached.
Blinking Red No Wi-Fi TCP. Traffic on physical Ethernet.
Amber Wi-Fi TCP connection. No physical Ethernet attached.
Blinking Amber Wi-Fi and physical networks connected.
Traffic between Wi-Fi and physical network.
Green Wi-Fi and physical networks connected.
No active traffic.