Page C-8
IsoAir 310P Aerosol Particle Sensor Operations Manual
Appendix C Wi-Fi Configuration
Instructions for IsoAir 310P Configuration
e.
All other definitions on the
Wi-Fi Bridge
web page must remain as shown in
f.
Click
Commit
button in the
Wi-Fi Bridge
web page.
g.
If operating outside of the United States, go to the
WLAN Settings
page on the
Wi-Fi bridge and select the region where you are operating.
h.
When all the parameters are set, re-boot the Wi-Fi bridge so the changes will
take effect.
5
Re-attach the RJ-45 connector from the Wi-Fi bridge to the sensor’s Ethernet
connector.
6
Verify that the sensor can communicate wirelessly.
The
SSID
is the name used to connect to the wireless accesspoint and should
be provided by the local IT department.
The
WLAN Security Type
and
Key
should be provided by the local IT
department to allow access to the above
SSID
.
