Page 4-4
IsoAir 310P Aerosol Particle Sensor Operations Manual
Chapter 4 Facility Net Setup
Reviewing Channel Configuration
Reviewing Channel Configuration
Use this instruction to reference the particle channel thresholds for the IsoAir 310P
particle sensor.
>> To reference the particle channel thresholds:
1
On the
IsoAir 310P Configuration
dialog box, click the
Channel Configuration
tab.
NOTE:
This information cannot be changed by the user.
Figure 4-3 Channel Configuration
tab in the
IsoAir 310P Configuration
dialog box
(for 4 channel mode)
When the IsoAir 310P particle sensor is configured for 2 channel mode, only two
channel sizes will be displayed. Those channels will be 0.5 and 5.0 µm
