Configuring Analog Sensors
Chapter 4 Facility Net Setup
IsoAir 310P Aerosol Particle Sensor Operations Manual
Page 4-5
Configuring Analog Sensors
Figure 4-4 Analog Sensors
tab in the
IsoAir 310P Configuration
dialog box
>> To configure analog sensors:
1
On the
IsoAir 310P Configuration
dialog box, click the
Analog Sensors
tab, if this
option was ordered.
NOTE:
Ensure that you use a unique name for the analyzer if multiple
analyzers are on the same network.
2
In the
Name
field, type a name for each of the Analog Sensors types, such as.
• Temperature
• Pressure
3
Click the
OK
button in the
Instrument Configuration
dialog box.
The sensor status and new parameters for the sensor appear.
