Spectris Particle Measuring Systems IsoAir 310P, Operation Manual

Page: 76 / 105

Instructions for IsoAir 310P Configuration Appendix C Wi-Fi Configuration
IsoAir 310P Aerosol Particle Sensor Operations Manual Page C-7
4 Start Internet Explorer (or equivalent web browser). Set the URL to the address
192.168.2.1 . Figure C-5 on page C-7 shows a sample of the Wi-Fi Web interface.
a. A username and password are required to communicate to the Wi-Fi. These are:
• Username:
dpac
• Password: dpac
Figure C-5 Wi-Fi Bridge Sample Web Page
b. In the Wi-Fi Bridge web page (see Figure C-5 ), click on Configuration .
c. Click on Express Setup to configure the correct IP address.
d. At a minimum, the following items (numbered 1 – 5 in Figure C-5 ) must be
configured:
The WLAN Static IP Address must match the IP address as it is confiured in
the IsoAir 310P (see Set the IsoAir 310P into Wi-Fi mode and select an IP
address for the instrument on page C-4).
The WLAN Gateway Address will match the IP address of the wireless router
or access point.
The WLAN Subnet Mask should be provided bythe local IT department.