Sony BVP-9500WS, Maintenance Manual

Page: 84 / 390

3-12 (E)
BVP-9500WS/9500WSP MM
3. R OFFSET adjustment
Select R signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
Adj. point: Clamp LEV [R]/OHB Trimming page
Specification: The level at portion A does not change.
4. B OFFSET adjustment
Select B signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
Adj. point: Clamp LEV [B]/OHB Trimming page
Specification: The level at portion A does not change.
5. Execute the File Store by selecting the OHB Trimming page from Maintenance Menu.
[OHB|Trimming]
→
[File|Store]
6. Set the OHB Trimming page from Maintenance Menu as follows and repeat steps from 2 to 5.
[OHB|Trimming]
→
[SPM]
→
[ON|180]
(for BVP-9500WS)
→
[ON|150]
(for BVP-9500WSP)
Setting after adjustment
.
[OHB|Trimming]
→
[GB]
→
[OFF]
→ [SH] → [ON]
→
[SPM]
→
[OFF|60]
(for BVP-9500WS)
→
[OFF|50]
(for BVP-9500WSP)
. S3-4/AT-128 board
→
OFF
. TEST OUT switch (side panel)
→
ENC
3-2. Video Adjustment