Sony BVP-9500WS, Maintenance Manual

Page: 65 / 390

2-3 (E)
BVP-9500WS/9500WSP MM
*
M a i n t e n a n c e M e n u
*
S y s t e m S e t u p
R e f e r e n c e S t o r e
L e n s F i l e S t o r e
O H B F i l e S t o r e
A u t o I r i s S e t u p
S u p e r M o t i o n S e t u p
O H B T r i m m i n g
2 0 0 0 – X X – Y Y Z . Z Z U C – N T S C
M e n u s e l – > e n t e r
2-2. Details of Maintenance Menu
2-2-1. Description of Maintenance Menu Display
Menu item Description
System Setup This item contains the camera system setting items such as field rate, gain value, aspect
ratio and so on.
Reference Store Use this item to register the reference file and reset the value to the factory setting state.
Lens File Store Use this item to register the lens file, reset the value to the factory setting state and switch
the registration lens.
OHB File Store Use this item to register the OHB file, reset the value to the factory setting state and
perform the shading adjustment.
Auto Iris Setup Use this item to set the reference level and APL (average level) ratio for auto iris.
Super Motion Setup Use this item to output the VBS signal and monitor output signal under the operation of
super motion.
n
This item is only displayed when the Field Rate of the System Setup page is set to 180/
150. (Refer to Section 2-2-2.)
OHB Trimming Use this item to register the OHB trimming file and perform the CCD V substrate voltage
adjustment.
n
To avoid incorrect operation, this item is not displayed at factory setting state.
To display this item because of performing adjustment, refer to “Section 2-1 Entering the
OHB Trimming Page”.
After adjustment, be sure to reset the switch to the factory setting state (not to be
displayed state).
2-2. Details of Maintenance Menu