Sony BVP-9500WS, Maintenance Manual

Page: 71 / 390

2-9 (E)
BVP-9500WS/9500WSP MM
*
O H B T r i m m i n g
*
[ R ] [ G ] [ B ]
V S U B : 9 9 9 9 9 9
C l a m p L E V : 0 0 0
S H : O N S P M : O f f 6 0
G a i n : 3 d B G B : O F F 5 6 : O F F
A l l P r e s e t : S u r e ?
F i l e S t o r e
(Display is initial values.)
2-2-8. OHB Trimming page
n
To avoid incorrect operation, this page is not displayed at factory setting state.
To display this page because of performing adjustment, refer to “Section 2-1 Entering the OHB Trimming
Page”.
After adjustment, be sure to reset the switch to the factory setting state (not to be displayed state).
Item Setting Description
V SUB
_
99 to 99 Adjusts the R, G, B CCD V substrate voltage.
Clamp LEV –99 to 99 Adjusts the Clamp offset.
SH ON/OFF Sets ON/OFF the black shading correction function.
SPM Off 60/On 180 Sets the field rate.
(for BVP-9500WS) Off 60/50 : x 1 speed
Off 50/On 150 On 180/150 : x 3 speed
(for BVP-9500WSP)
Gain _ 3, 0, 3, 6, 9, 12 Sets the master gain.
GB ON/OFF Sets ON/OFF the gain bounce mode.
56 ON/OFF Sets ON/OFF the function to set the color temperature to 5600K.
All Preset Press the MIC 1 LEVEL Returns the control data from the OHB trimming file to initial setting for
knob to execute. adjustment.
File Store Press the MIC 1 LEVEL Registers the OHB trimming file and OHB file.
knob to execute.
2-2. Details of Maintenance Menu