manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 95

Chapter 7 - Editing

Courier User Handbook                                    7-15

Note : In the 

Edit Mode,

 sections of the edit which have been “deleted” using

the DELETE button will not be played if added to the Playlist.

Press the MENU button and select [Add to Playlist] :

4. In the 

Playlist Compile Mode

 you can create a copy of a cut which is already

there by pressing the EDIT key to edit the cut, then pressing the MENU button and
selecting [Add to Playlist].

Press the EDIT button again to return to the 

Playlist Compile Mode 

where the

copied cut is added to the bottom of the Playlist.

7.8.4.  Saving a Playlist

Once you have created a Playlist you can save it in one of many formats depending
upon what recording styles you have used in the creation of the Playlist.

If you have either a single linear or a mixture of linear file formats you can save the
Playlist in one of the following formats :

WAV, BWF, AIFF or as a New Playlist.

If you have used MPEG compression file formats you will be able to save the
Playlist in one of the following file formats :

MP2, BWF, EncoDAD or as a New Playlist.

If you have used the DAVE2000 file format you can save the Playlist as follows :

DAVE2000 or as a New Playlist

Note : When Courier is powered down, any Playlist in memory will be
discarded, so it is important to save the Playlist to disk if you have added edits
to the Playlist but have not used the Playlist Compile screen to change them.

7.8.4.1. Save

To save the current Playlist, in the 

Cut-List Mode

, press the MENU button and

select [Playlist], [Save] :

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands