Sonifex COURIER, User Handbook Manual

Page: 136 / 218

Chapter 11 - PhoneBook
11-4 Courier User Handbook
11.1.4. Selecting a script file
A script file is required if the host computer to which you are sending a data file
has a special log on procedure (for example logging onto a bulletin board, or a file
server which has password protection on entry).
The default Courier script file sends out the following :
CourierCalling - This is first name.
COXXXXX - This is the last name with the XXXXX being replaced by the
serial number of your Courier.
Guest - This is the default password.
If you need to write a new script file for use with your host machine, you need to
save it to the text directory on the PCMCIA disk before it becomes available for
selection in the Courier menus. Script files are ASCII text files with the extension
of .scp (e.g. host1.scp). They can not be generated on the Courier, but can be
written either by the Courier Configuration Manager software, or by using a
standard text editing program, such as Windows Notepad. Further information is
available in section 13.6.
To select a script file, choose from the drop-down list that appears when [Script
File] is selected :
Choose [Close] to exit, or use the MENU button.
11.1.5. Modem types
When you are about to dial a number using the PhoneBook, so that you can transfer
files using a modem or GSM mobile, you will have a selection to make as to the
type of modem that you wish to use.
Modem types are hard-programmed into the Courier, so if you find that none of the
available modem types work correctly, you will need to contact Sonifex, or your
dealer.