Sonifex COURIER, User Handbook Manual

Page: 21 / 218

Chapter 2 - Introduction
Courier User Handbook 2-7
n General buttons
POWER
Depress and hold the POWER button for 0.5 sec to turn the
Courier on. The machine initializes and is ready to operate in
about 10 seconds. To turn the machine off, press and hold the
POWER button for 1 second until the display indicates that the
machine will be switched off. Then release the button.
BATT/DISK
Depressing this button allows you to see the battery and hard
disk time remaining on the display.
LIGHT
This switches on the backlight of the display. The backlight
duration can be configured in the software.
MONITOR
Pressing and holding the MONITOR button allows you to hear
what you have recorded, in delay, so that you can check that
the recording you are making is actually being written to the
hard disk.
o LCD and scroll control buttons
The liquid crystal display is a back-lit graphical display.
UP button
The UP button is used for scrolling the menu or Cut-List up
one place, or for changing a character whilst renaming a cut. It
is also used for increasing the output level during playback.
The LED in the button is a peak level indicator for the left
channel.
DOWN button
The DOWN button is used for scrolling the menu or Cut-List
down one place, or for changing a character whilst renaming a
cut. It is also used for decreasing the output level during
playback. The LED in the button is a peak level indicator for
the right channel.
ENTER button
When the menu is active, the ENTER button is used to select
the highlighted item. When cuts are listed, pressing ENTER
with show properties of the cut.
The LED in the button is used as a battery and power status
indicator.