manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 116

 Chapter 9 - System settings & display options

9-2                                  Courier User Handbook

9.2.2.  Altering the time

From the 

Cut-List Mode

, press the MENU button and select [Setup], [System] and

[Set Time] :

The time is shown in 24 hour clock format. hh = hours, mm = minutes, ss =
seconds. Use the UP and DOWN arrows, or the SCRUB-WHEEL, to change the
highlighted duration and the ENTER key to accept it.

If you want to quit from this screen at any time without making any changes, press
the MENU button.

Once you have entered the “seconds” value [ss], you will be asked to confirm your
selection :

Select [OK] to set the time displayed. The time will be set the moment that you
press the ENTER button.
Select [Cancel] to return to the menu without making any alterations.

9.2.3.  Altering the date

From the 

Cut-List Mode

, press the MENU button and select [Setup], [System] and

[Set Date] :

                                       

The date will be shown in the format selected using the [Date Format] option. DD
= Day, MM = Month, YY = Year. Use the UP and DOWN arrows, or the SCRUB-
WHEEL, to change the highlighted date and the ENTER key to accept it.

If you want to quit from this screen at any time without making any changes, press
the MENU button.

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands