Sonifex COURIER, User Handbook Manual

Page: 91 / 218

Chapter 7 - Editing
Courier User Handbook 7-11
Select a part of the waveform which you want to alter and press the MENU button
to show :
Select [Scale] from this menu to show the audio waveform with [Max] and [Min]
level values along the bottom of the screen.
The [Max] value refers to the level that will be shown as a maximum on the
waveform. Decreasing this value will increase the peaks of the waveform. As
standard, the Max value is set to +10dB.
The [Min] value refers to the level that will be shown as the baseline, or minimum
level on the waveform. Decreasing this value will increase the peaks of the
waveform. As standard, the Min value is set to -20dB.
Note : There must be a minimum difference between the Max and Min values
of 10dB.
Adjust the level by using the UP and DOWN scroll keys, or the SCRUB-WHEEL.
Note that it takes a little while for the screen to display the changes. Use the
ENTER key to move from the [Max] to the [Min] value and vice-versa.
To exit this screen, press and hold the ENTER key, or press the MENU button.
Note : There is no [Undo] or [Cancel] facility when altering the scale - when
you exit the screen, that is how the scale will be left.
7.6.3. Changing the mode of the timer display
Whilst you are editing, the timer in the lower left corner can show either :
•
The position of the central cursor in the whole cut – this is the normal method
of operation so that you can view where you are in the cut and is useful for
edits of long recordings.