manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 63

Chapter 5 - Recording

Courier User Handbook                                  5-15

5.7.6.  Renaming a Record Style

In the 

Cut-List Mode

, press the MENU button and select [Setup], [Styles] and then

[Rename].

Select the Record Style that you wish to rename and press ENTER :

The first character of the selected Style will be highlighted. Use the UP and DOWN
arrows, or the SCRUB-WHEEL, to change the character and the ENTER key to
move on to the next character. You can use any character in the range : A - Z, a - z,
0 - 9 and the Space character. If you want to quit from this screen without making
any changes, press the MENU button.

You can enter a total of 10 characters, or you can enter a smaller sized name by
entering the Space character twice after the name. Once the new name has been
entered, you will be asked to confirm it :

ENTER on [OK] if the new name is correct, or select [Cancel] if not.

5.7.7.  Deleting a Record Style

In the 

Cut-List Mode

, press the MENU button and select [Setup], [Styles] and then

[Delete].

Select the Record Style that you wish to delete and press ENTER :

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands