manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 120

 Chapter 9 - System settings & display options

9-6                                  Courier User Handbook

9.5.

 

Passwording

Access through the [Setup] menu can be limited by setting a password. This can be
useful if you don’t want anyone else to alter the configuration of the Courier. If no
password is set, then anyone can change any of the options in the Courier menu
structure.

On delivery of the Courier there is no password set, so you will have access to the
full [Setup] menu structure.

9.5.1.  Setting the password

In the 

Cut-List Mode

, press the MENU button and select [Setup], [System] and

[Enter Password]. The following screen is displayed :

The first space character of the new password is highlighted. Use the UP and
DOWN arrows, or the SCRUB-WHEEL, to change the character and the ENTER
key to move on to the next character. You can use any character in the range : A -
Z, a - z, 0 - 9, i.e. the password is case sensitive. The Space character is used to end
the password, or you can enter the full six characters allowed for the password.
This means that spaces can not be used in the password.

If you want to quit from this screen without making any changes, press the MENU
button. Once the password has been entered, you must confirm it, to ensure that it is
correct :

Enter the same characters as above and press the ENTER key. If you have re-
entered the same characters, then the password will be accepted and you’ll return to
the [System] sub-menu. If you incorrectly re-enter the password characters, the
following will be displayed and you’ll be returned to the sub-menu after a few
seconds :

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands