Sonifex COURIER, User Handbook Manual

Page: 119 / 218

Chapter 9 - System settings & display options
Courier User Handbook 9-5
If you want to quit from this screen at any time without making any changes, press
the MENU button.
When you have entered the last character, a confirmation screen will be shown :
Select [OK] to write the configuration file to disk with the chosen filename.
Select [Cancel] to return to the menu without saving a setup file to disk.
9.4.2. Reading a setup file from disk
Courier will read any legitimate configuration .ini files from the /SETUPS directory
on the disk.
In the Cut-List Mode , press the MENU button and select [Setup], [System] and
[Read Setup]. If there are no suitable files on the disk, the Courier will display the
message “No Files on Disk” and will return to the menu after a few seconds. If
there are .ini files on the disk, they will be displayed :
To exit from this screen without loading a new file, press the MENU button - you
will be returned to the
Cut-List Mode and no changes will have been made.
Use the UP and DOWN arrows, or the SCRUB-WHEEL to scroll through the setup
files. Press the ENTER button to load, or read, the setup information into the
Courier. The Courier will display :
The Courier will now operate with the new setup information.