manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 163

Chapter 13 - courier configuration manager

Courier User Handbook                                13-1

13.  Courier Configuration Manager

The Courier Configuration Manager (CCM) is a piece of software supplied with
your Courier which you can use for writing setup .ini files which can be loaded into
a Courier machine to configure the options. Every Courier has the ability to read
and write these .ini files so that you can load the same setup file onto different
Courier machines.

The CCM program can also be used for transferring files to and from the Courier -
this can be used to upload new software into the Courier as well as transferring
audio and setup files between a PC and the Courier.

The software operates under Windows 95 or Windows 98.

13.1. Installing the Courier Configuration

Manager software

Put the floppy disk into the floppy drive of
your PC and from the “Start” button select
“Settings” and “Control Panel”

In Control Panel, select “Add/Remove
Programs”

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands