manualshive.com logo in svg

Sonifex COURIER, User Handbook Manual

Share
Download
Sonifex COURIER User Handbook Manual Download Page 104

 

Chapter 8 - Using the Courier file system

8-2                               Courier User Handbook

8.1.1.1.  Altering the first three [Initials]

characters

Press the MENU key in the 

Cut-List Mode

 and select [Setup] and [Filing] to show :

Select [Initials] :

The first character of the [Initials] will be highlighted. Use the UP and DOWN
arrows, or the SCRUB-WHEEL, to change the character and the ENTER key to
move on to the next character. You can use any character in the range : A - Z, 0 - 9,
_ and @. Note that the space character can only be used for characters two and
three which truncates the initials field, so that you can use just a one or two
character initial if you wish.

If you want to quit from this screen at any time without making any changes, press
the MENU button.

Once the new name has been entered, you will be asked to confirm it :

Enter on [OK] if the new name is correct, or select [Cancel] if not.

8.1.1.2.  Altering the [Machine ID]

Press the MENU key in the 

Cut-List Mode

 and select [Setup] and [Filing] to show :

Select [Machine ID] :

Summary of Contents for COURIER



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands