![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417207.webp)
SNMP C
OMMANDS
3-63
snmp-server enable traps
Use this command to enable this device to send Simple Network
Management Protocol traps (SNMP notifications). Use the
no
form to
disable SNMP notifications.
Syntax
snmp-server enable traps
[
authentication
|
link-up-down
]
no snmp-server enable traps
[
authentication
|
link-up-down
]
•
authentication
- Keyword to issue authentication failure traps.
•
link-up-down
- Keyword to issue link-up or link-down traps.
Default Setting
Issue authentication and link-up-down traps.
Command Mode
Global Configuration
Command Usage
• If you do not enter an
snmp-server enable traps
command, no
notifications controlled by this command are sent. In order to
configure this device to send SNMP notifications, you must enter at
least one
snmp-server enable traps
command. If you enter the
command with no keywords, all notification types are enabled. If you
enter the command with a keyword, only the notification type related
to that keyword is enabled.
• The
snmp-server enable traps
command is used in conjunction with
the
snmp-server host
command. Use the
snmp-server host
command to specify which host or hosts receive SNMP notifications.
In order to send notifications, you must configure at least one
snmp-server host
command.
• The notification types used in this command all have an associated
MIB object that allows them to be globally enabled or disabled. Not all
of the notification types have notificationEnable MIB objects, so some
of these cannot be controlled using the
snmp-server enable traps
command.
Summary of Contents for TigerSwitch 100
