![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417258.webp)
C
OMMAND
L
INE
I
NTERFACE
3-114
Example
Related Commands
spanning-tree port-priority (3-114)
spanning-tree port-priority
Use this command to configure the priority for the specified interface. Use
the
no
form to restore the default.
Syntax
spanning-tree port-priority
priority
no spanning-tree port-priority
priority
- The priority for an interface. (Range: 0-240, in steps of 16)
Default Setting
128
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• This command defines the priority for the use of an interface in the
Spanning Tree Protocol. If the path cost for all interfaces on a switch
are the same, the interface with the highest priority (that is, lowest
value) will be configured as an active link in the Spanning Tree.
• Where more than one interface is assigned the highest priority, the
interface with lowest numeric identifier will be enabled.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree cost 50
Console(config-if)#
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree port-priority 0
Console(config-if)#
Summary of Contents for TigerSwitch 100
