![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417243.webp)
I
NTERFACE
C
OMMANDS
3-99
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
The items displayed by this command include:
•
Broadcast threshold
– Shows if broadcast storm suppression is
enabled or disabled; if enabled it also shows the threshold level (page
3-92).
•
Lacp status
– Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 3-168).
•
VLAN membership mode
– Indicates membership mode as
Trunk or Hybrid (page 3-125).
•
Ingress rule
– Shows if ingress filtering is enabled or disabled (page
3-127).
•
Acceptable frame type
– Shows if acceptable VLAN frames
include all types or tagged frames only (page 3-126).
•
Native VLAN
– Indicates the default Port VLAN ID (page 3-128).
•
Priority for untagged traffic
– Indicates the default priority for
untagged frames (page 3-150).
•
Gvrp status
– Shows if GARP VLAN Registration Protocol is
enabled or disabled (page 3-132).
•
Allowed Vlan
– Shows the VLANs this interface has joined, where
“(u)” indicates untagged and “(t)” indicates tagged (page 3-129).
•
Forbidden Vlan
– Shows the VLANs this interface can not
dynamically join via GVRP (page 3-130).
Example
This example shows the configuration setting for Ethernet port 15.
Summary of Contents for TigerSwitch 100
