![background image](http://html1.mh-extra.com/html/smc-networks/tigerswitch-100/tigerswitch-100_management-manual_1300417120.webp)
C
ONFIGURING
THE
S
WITCH
2-90
Dynamically Configuring a Trunk with LACP
Command Usage
•
To avoid creating a loop in the network, be sure you enable LACP
before connecting the ports, and also disconnect the ports before
disabling LACP.
•
If the target switch has also enabled LACP on the connected ports, the
trunk will be activated automatically.
•
A trunk formed with another switch using LACP will automatically be
assigned the next available trunk ID.
•
If more than four ports attached to the same target switch have LACP
enabled, the additional ports will be placed in standby mode, and will
only be enabled if one of the active links fails.
•
All ports on both ends of an LACP trunk must be configured for full
duplex, either by forced mode or auto-negotiation.
Summary of Contents for TigerSwitch 100
